Safety Tips for Working on Electric Motors

Safety Tips for Working on Electric Motors

November 10, 2017

Many types of electric motor repair in Columbia, TN offer DIY opportunities. If you are feeling handy (or want to learn to be more so), you can dig into a project with the right tools and instructions. However, your first priority should be safety.

Before starting on any electric motor repair in Columbia, TN, take the proper safety precautions. Following are a few of the top concerns to consider before diving into your project. Skipping these procedures can lead to injury, fire and electric shock:

  • Work area prep: Do you have a proper workspace to complete your electric motor repair in Columbia, TN? Working in a cluttered or cramped space can be not only frustrating but dangerous. Always keep your work area clean and well lit.
  • Adult-only zone: If you’re working in a home with children, beware—they are faster and sneakier than you suspect. All motors include small parts they can quickly get their hands on. Keep very young children away from the work area to prevent choking or other injuries.
  • Protective gear: Few like to wear them, but everyone needs them. Safety goggles are a must when working on electric motor repair in Columbia, TN. Motors spin very quickly. Don’t risk an eye injury caused by flying debris.
  • Dress code: Before you don your safety goggles, remove other accessories. Rings, necklaces, earrings, watches and other items pose hazards. These can easily get caught in machinery or fall into a spinning motor. Take these off before you take on your project.
  • Proper voltage: Avoid electric shock by using the right voltage level. Do not exceed recommended volts. Doing so can cause injury as well as cause the parts to overheat and start a fire.
  • Careful oversight: Will you finish your electric motor repair in Columbia, TN in one sitting? If you need to stop working and return to the project later, take proper precautions. Never leave the motor unattended. Finish your repairs, put everything away, or secure the location to prevent injury, fire or other hazards.
  • Heat warning: Remember that electric current generates heat. Avoid touching transistors while working. Heated electrical parts can cause severe burns. Handle parts carefully and consider wearing work gloves.
  • Soldering safety: Soldering irons are helpful tools, but they can pose safety hazards if not used properly. Ensure proper ventilation for fumes, keep the iron on its stand when not in use and be careful not to touch it.
  • Glue care: If using any type of super-adhesive, take care to avoid skin contact. Point tubes away from yourself or any objects as you open them. Keep in mind these adhesives are instant-bonding, so use with caution.

If you need electric motor repair in Columbia, TN, consider contacting a professional. With the proper tools, experience and knowledge, they can offer helpful consultation or complete the repairs for you. If you aren’t sure you can safely complete the repairs yourself, always contact an expert rather than risk injury or harm. For local experts in electric motor repair in Columbia, TN, reach out to Action Electric Motor & Pump Repair today.

Categorised in:

Map of Columbia

map

Location

Action Electric Motor & Pump Repair
Columbia , TN 38401
(931) 285-0138

Business Hours

Open 24 hrs a day

Contact Us Today!

September 17, 2020 Jimmy Hill
"Todd did a great job, very professional. He replaced pump, pipe and wire on my 200 ft. well. I highly recommend Todd."
June 1, 2020 Steve Hill
"Todd was prompt and provided professional service. I had my well pump replaced along with other plumbing in my well house. He knows what h..."
June 1, 2020 Steve Hill
"Professional service and on time. I had my well pump replaced along with pipes in my well house. I had purchased ased Everything went grea..."
September 30, 2019 Reggie Smith
"Todd came out to our HOUSE to fix our well pump and he did a good job and was very nice and if I ever need more work done on our well pump ..."
September 30, 2019 Reggie
"our well pump went out and Todd came and fixed it replaced our pump so we could have running water we are so pleased with this work I would ..."
© 2020 Action Electric Motor & Pump Repair | Terms and Conditions