Everything Well Owners Need to Know About Pulling and Replacing a Pump

A failing pump is bad news for folks who rely on a well to get their water. After all, the pump is responsible for bringing water up to the surface from deep in the well. Although pumps are designed to last for years, there may be a time when it needs to be repaired or replaced. The first step in either process is pulling the pump out of the ground.

This post will cover what you need to know about pulling and replacing a pump in Wewahitchka, FL.

The pulling process

Pulling and replacement is a two-man job, so grab a friend to help out for these tasks. After turning off the pump’s electrical supply, start the pulling process by removing the well cap. Grab your T-handle tool, insert it into the well and thread the end of the tool into the threads of the pipe.

The person pulling the pump needs to stand right above the well and pull the pump straight up while the assistant ensures there aren’t any kinks in the waterline. Once the pump is safely out, cover the well back up.

The replacement process

Now that the pump is out of the well, it’s time to decide whether it needs to be completely replaced or if well pump repair in Wewahitchka, FL is a viable option. Since there’s not always a clear-cut answer, we recommend bringing in a professional to take a look. Your contractor can either make the repairs on the spot or advise you on which new well pump is right for your property.

Either way, the pump will need to go back into the ground. To replace the pump, stand directly above the well and lower it straight into the ground with your T-handle tool. Again, your partner will need to check for any kinks in the waterline. Once the pump is back in and reattached to the pipe, close the well cap.

Should well owners replace well pumps by themselves?

It’s never a bad idea to teach customers about replacing a pump in Wewahitchka, FL; however, we never recommend actually trying the process unless you’re a pro. Submersible well pumps are heavy pieces of equipment that can be dangerous to lift out without proper gear. Additionally, trying to replace it yourself can permanently damage the pump or well.

Instead of damaging the pump or hurting yourself, it’s best to just call a professional. Working with a pro ensures that the job is performed correctly and that your pump will function as it should for years to come.

Contact our team to address all of your well’s needs

Instead of risking it, turn to our pros at Action Electric Motor & Pump Repair. With over 40 decades of experience working with wells of any depth, you can trust you’re in good hands when you get in touch with us for well pump repair in Wewahitchka, FL. Whether you need us to pull it, fix it or install a new well, we’ve got you covered.

Categorised in: Well Pump Repair